A FINELY DETAILED AND PRESENTED 1:75 SCALE MODEL OF THE ARCTIC AND POLAR EXPLORATION VESSEL FRAM [1892]
the 20in. hull planked over a former with retractable propeller and rudder with reinforced bow and stern, planked decks with details including capstan, winches, ventilators, anchors, deck lights, bilge pumps, companionways, retractable funnel with hooter, four covered lifeboats and davits, binnacle, helm on steering gear with chains, masts with standing and running rigging, yards and lightning conductors, ship's bell, mounted on ebonized cradle stand within the glazed case -- 28 x 34½ x 13in. (71 x 87.5 x 33cm.) overall
Fram ("Forward"), built in 1892, was designed by Colin Archer (1832-1921) a Norwegian naval architect born to Scottish émigré parents to the express order of Fridtjof Nansen (1861-1930), the 'grandfather' of Norwegian polar exploration, for his 1893-96 polar expedition. Learning from previous failed attempts, Nansen instructed Archer to create a vessel like no other: I propose to have a ship built as small and as strong as possible - just big enough to contain supplies.. for twelve men for five years.. The main point is that it be built on such principles as to enable it to withstand the pressure of ice... Instead of nipping the ship, the ice must raise if up out of the water. Massively built, smooth-sided and double-ended, without a keel or garboard strakes, the stem was 4ft thick, the frames 21in. wide and planked in 30-year-old 13in. oak. She measured just 127ft with a 34ft beam and 15ft draft displacing 402 tons. Rigged as a schooner but fitted with an auxiliary engine with enough coal for four months steaming, she was mainly used with sails and, whilst sea-worthy, the absence of a keel allowed her to corkscrew and roll nearly all the time, and she was undoubtedly slow. She was in her true element when icebound and Nansen, and later Roald Amundsen (1872-1928) who brought Fram out of retirement in 1910 both returned home happy, healthy and triumphant from their respective expeditions. Fram has been preserved since 1936 at Bygdøy, Oslo, Norway.
Sold for £6,200
Estimated at £3,000 - £5,000
(inc. buyer's premium of 24%)
Condition Report
Fine overall condition.
We are pleased to provide you with a general report of the condition of this property. Since we are not professional conservators or restorers, we urge you to consult with a restorer or conservator of your choice who will be better able to provide a detailed, professional report. Prospective buyers should inspect each lot to satisfy themselves as to condition and must understand that any statement made by Charles Miller Ltd is merely a subjective, qualified opinion. Prospective buyers should also refer to any Important Notices regarding this sale, which are printed in the Sale Catalogue. NOTWITHSTANDING THIS REPORT OR ANY DISCUSSIONS CONCERNING A LOT, ALL LOTS ARE OFFERED AND SOLD “AS IS” IN ACCORDANCE WITH THE CONDITIONS OF BUSINESS PRINTED IN THE SALE CATALOGUE.
A FINELY DETAILED AND PRESENTED 1:75 SCALE MODEL OF THE ARCTIC AND POLAR EXPLORATION VESSEL FRAM [1892]
the 20in. hull planked over a former with retractable propeller and rudder with reinforced bow and stern, planked decks with details including capstan, winches, ventilators, anchors, deck lights, bilge pumps, companionways, retractable funnel with hooter, four covered lifeboats and davits, binnacle, helm on steering gear with chains, masts with standing and running rigging, yards and lightning conductors, ship's bell, mounted on ebonized cradle stand within the glazed case -- 28 x 34½ x 13in. (71 x 87.5 x 33cm.) overall
Fram ("Forward"), built in 1892, was designed by Colin Archer (1832-1921) a Norwegian naval architect born to Scottish émigré parents to the express order of Fridtjof Nansen (1861-1930), the 'grandfather' of Norwegian polar exploration, for his 1893-96 polar expedition. Learning from previous failed attempts, Nansen instructed Archer to create a vessel like no other: I propose to have a ship built as small and as strong as possible - just big enough to contain supplies.. for twelve men for five years.. The main point is that it be built on such principles as to enable it to withstand the pressure of ice... Instead of nipping the ship, the ice must raise if up out of the water. Massively built, smooth-sided and double-ended, without a keel or garboard strakes, the stem was 4ft thick, the frames 21in. wide and planked in 30-year-old 13in. oak. She measured just 127ft with a 34ft beam and 15ft draft displacing 402 tons. Rigged as a schooner but fitted with an auxiliary engine with enough coal for four months steaming, she was mainly used with sails and, whilst sea-worthy, the absence of a keel allowed her to corkscrew and roll nearly all the time, and she was undoubtedly slow. She was in her true element when icebound and Nansen, and later Roald Amundsen (1872-1928) who brought Fram out of retirement in 1910 both returned home happy, healthy and triumphant from their respective expeditions. Fram has been preserved since 1936 at Bygdøy, Oslo, Norway.
Auction: Maritime and Scientific Models, Instruments & Art (GLADIATOR), 25th Apr, 2023
59
Page turning catalogue here
Downloadable bid form here
Saleroom notice here
Order of Sale:
Mercantile (Sail & Yachting) 1-75
Mercantile (Steam) 76-132
Naval (Sail) 133-237
Naval (Steam) 238-294
Navigational & Scientific Instruments 295-353
You will not be able to bid in person for this sale, however, there are a number of ways you can still participate:
We regret we are unable to offer telephone bidding for this sale
Shippers
Part & Parcel / shipping@partandparceluk.com / Tel: +44 (0)1252 545611
Alban Shipping / info@albanshipping.co.uk / Tel: +44 (0) 1582 493099
Simon Jones Superfreight / info@superfreight.co.uk / +44 (0)20 7924 3933
Viewing
By appointment only.
Please call or email to book a slot: Tel: (0)20 7806 5530 or enquiries@charlesmillerltd.com